Add network info

README.md

@@ -27,6 +27,8 @@ This implementation is built on easily accessible consumer based hardware and wi
 
 ## Prerequisites
 
+- Proxmox (In my homelab, internal DNS, identity manangement, and ipxe are hosted here.)
+- Matchbox
 - DNS
 - Domain Registration
 
@@ -66,7 +68,7 @@ Find additional details in the ./02-rhacm-config folder.
 
 #### Creating a Cluster
 
-With everything in its right place, you can now start to declaratively create clusters - so choose your own adventure:
+With everything in its right place, you can now start to declaratively create clusters
 
 ./05-clusters/hcp-bmh - HCP to Bare Metal Hosts
 
@@ -80,4 +82,6 @@ This makes it to where you just need 3 bare metal nodes. You could run one HCP B
 
 You'll also either need you just need at least 2 bare metal nodes.
 
+---
+
 Credit to Ken Moini as I used his [repo](https://github.com/kenmoini/ztp-for-you-and-me) as the baseline for this project.

docs/networks.md

@@ -0,0 +1,9 @@
+# Networks
+
+My homelab is segmented into a set of networks. Each network is a separate subnet, and each subnet is a separate VLAN that usually corresponds to the 3rd octet of the IPv4 block it aligns to. The following table shows the network and VLAN information:
+
+| Network          | VLAN | DHCP Range         | Description        |
+|------------------|------|--------------------|--------------------|
+| XXX.XXX.XXX.0/24 |   71 | XXX.XXX.XXX.10-250 | Server network     |
+| XXX.XXX.XXX.0/24 |   22 |                    | Cluster network    |
+| XXX.XXX.XXX.0/24 |  121 |                    | Storage network    |