---
# JMRI version to install
jmri_version: "5.10"
jmri_install_dir: /opt/JMRI
jmri_download_url: "https://github.com/JMRI/JMRI/releases/download/v{{ jmri_version }}/JMRI.{{ jmri_version }}+Rca461bd266.tgz"

# Service user
jmri_user: jmri
jmri_group: jmri
jmri_home: /home/jmri

# Profile — set per-host in host_vars
jmri_profile_id: ""

# LCRR git repo (set per-host in host_vars; leave blank to skip clone)
jmri_lcrr_repo: ""

# SSH key for jmri user (for jmri-gui X11 access — set per-host in host_vars)
jmri_ssh_authorized_key: ""

# SSH key for jmri user → Gitea
jmri_gitea_key: /home/jmri/.ssh/id_ed25519_gitea

# Config restore source (legacy tar-based restore — leave blank to skip)
jmri_config_src: ""

# Ports (for documentation / firewall rules)
jmri_json_port: 12080
jmri_withrottle_port: 12090

# ---------------------------------------------------------------------------
# Phase 2 — Layout power monitor (Leviton Decora Smart Wi-Fi)
# ---------------------------------------------------------------------------
jmri_leviton_email: ""          # set via group_vars (vault-backed)
jmri_leviton_password: ""       # set via group_vars (vault-backed)
jmri_leviton_switch_name: "Layout"
jmri_monitor_poll_interval: 30  # seconds between polls (active hours)
jmri_monitor_quiet_start: 1     # hour (24h) to stop polling
jmri_monitor_quiet_end: 10      # hour (24h) to resume polling
jmri_monitor_stop_delay: 30     # seconds of OFF state before stopping JMRI

# ---------------------------------------------------------------------------
# USB device identification (ENV{ID_SERIAL} from udev — the segment of the
# by-id symlink name before the -ifNN suffix)
# ---------------------------------------------------------------------------
# LocoBuffer-NG (LocoNet bridge) → /dev/jmri/loconet
jmri_dev_loconet_serial: "RR-CirKits_LocoBuffer-NG_CDC_ACM_SERIAL_DEVICE_AA5700218A"

# NCE command station → /dev/jmri/nce  ← triggers service start/stop
jmri_dev_nce_serial: "Microchip_Technology_Inc._Simple_CDC_Device_Demo"

# FTDI LCC interface → /dev/jmri/lcc
jmri_dev_lcc_serial: "ftdi_usb_serial_converter_ftDYQHZX"