d974c75d7c
- Stable udev device symlinks (/dev/jmri/nce, /dev/jmri/loconet, /dev/jmri/lcc) - jmri-monitor: polls Leviton Decora Smart switch to start/stop JMRI automatically - Quiet hours 1-10 AM (no polling) - 30s off-delay before shutdown - LCRR config cloned from Gitea (ssh://gitea.mk-labs.cloud:2221/rblundon/LCRR.git) - ~/.jmri symlinked to LCRR repo for GitOps config management - jmri-gui: X11 remote GUI access (PanelPro/DecoderPro) via ssh -X as jmri user - Stops daemon, launches GUI, restarts daemon on exit if layout still on - jmri user gets login shell + SSH key for GUI sessions - Full JRE installed (openjdk-21-jre) for AWT/X11 support
26 lines
1.0 KiB
Django/Jinja
26 lines
1.0 KiB
Django/Jinja
# /etc/udev/rules.d/99-jmri-devices.rules
|
|
# Managed by Ansible — do not edit manually.
|
|
#
|
|
# Creates stable /dev/jmri/* symlinks for all three JMRI serial interfaces.
|
|
# Uses ID_SERIAL (full serial string) to match by-id symlink identity,
|
|
# so device numbering (ttyACM0, ttyACM1, etc.) doesn't matter after reboots.
|
|
# Ownership: root:dialout mode 0660 — jmri user is a member of dialout.
|
|
|
|
# NCE command station (Microchip CDC)
|
|
# Appears when layout is powered on; disappears when layout powers off.
|
|
SUBSYSTEM=="tty", ENV{ID_SERIAL}=="{{ jmri_dev_nce_serial }}", \
|
|
SYMLINK+="jmri/nce", \
|
|
GROUP="dialout", MODE="0660"
|
|
|
|
# RR-CirKits LocoBuffer-NG (LocoNet bridge)
|
|
# USB-powered — always present when server is running.
|
|
SUBSYSTEM=="tty", ENV{ID_SERIAL}=="{{ jmri_dev_loconet_serial }}", \
|
|
SYMLINK+="jmri/loconet", \
|
|
GROUP="dialout", MODE="0660"
|
|
|
|
# FTDI USB serial (LCC interface)
|
|
# USB-powered — always present when server is running.
|
|
SUBSYSTEM=="tty", ENV{ID_SERIAL}=="{{ jmri_dev_lcc_serial }}", \
|
|
SYMLINK+="jmri/lcc", \
|
|
GROUP="dialout", MODE="0660"
|